NEWS AND EVENTS

You are here: Home » News » Industry Encyclopedia » Optimal Rear Wheel Position for Wheelchairs

Optimal Rear Wheel Position for Wheelchairs

Views:1     Author:Site Editor     Publish Time: 2021-07-08      Origin:Site

Optimal Rear Wheel Position for Wheelchairs


 

Are you efficient when propelling your wheelchair? Is propelling your wheelchair painful for you? This may have to do with the position of your rear wheel.

 

Manual self-propulsion is the kind of mobility used by people with lower extremity disabilities in order to keep having independence and autonomy to complete daily activities.

 

Users completely rely on their upper extremities for mobility and increase their risk of upper-limb overuse injuries. To reduce the risk of injury, optimal rear wheel position needs to be taken into account.

 


Optimal rear wheel access

An optimally adjusted wheelchair should allow the user to reach the wheel hub with the tip of the middle finger. This makes the center of mass to be positioned over the wheel hub, and ensure the elbows to be at around 100-120° angle between the upper arm and forearm when they are on top of the handrim.

 

 

Taking into account that this is the optimal elbow angle to avoid possible injuries when self-propelling, rear wheels need to be vertical and horizontally adjusted in order to:

 

Allow you to have a comfortable and stable position.

Maximize function.

Maximize propulsion efficiency.

Decrease the risk of repetitive strain injuries.

However, we often find many cases in which the position is not optimal. So what happens when the rear wheel is not in the optimal position?

 


Rear wheel horizontal position

Has you wheelchair ever tipped backwards? Do you find your wheelchair difficult to manoeuvre? Do you know why these situations happen? The center of mass or center of gravity can have a big impact on a chair being too tippy.  The center of gravity can be set for the user by adjusting the rear wheels horizontally forwards or backwards.

 

The center of gravity has a direct influence on how the weight is distributed between the rear wheels and the front casters. At the same time, this weight distribution will have an impact in the wheelchair's performance: rolling resistance and manoeuvrability.

 

In the case of adjusting the rear wheels backwards:

 

The user's center of gravity moves forward.

There is more weight over the front casters, which makes the wheelchair more difficult to manoeuvre and harder to roll.

Longer wheelchair footprint and turning circle.

Stability increases significantly.

The arms make more effort, as the elbow is excessively flexed.

Risk of upper limb overuse injury increases.

Inefficient stroke.

In summary, this would be the rear wheel configuration of a wheelchair for more passive users, but very stable.

 

 

On the contrary, in the case of adjusting the rear wheels forward:

 

The user's center of gravity moves rearward

There is less weight over the casters, requiring less power to propel and manoeuvre it and allowing for a smoother ride

Smaller wheelchair's footprint and turning swing

Stability decreases

The arms need less effort

Risk of upper limb overuse injury decreases

More efficient stroke

In this case, this would be the typical rear wheel configuration of a wheelchair for more active users, but it will be less stable. That's why the user may need some training to improve their wheelchair skills.

 


Rear wheel vertical position

Most active wheelchairs allow for vertical adjustability. Positioning rear wheels up or down in relation to the frame of a manual wheelchair will have an effect on seat-to-floor height, orientation in space and rear wheel access.

 

If your rear wheels are too low or small, it means that you cannot reach the hub. This specific position will have some effects.

 

You will have less access to the handrim surface and result in an inefficient stroke.

You will need more repetitions to cover a certain distance.

Consequently, you will experience an increase in the stress on the upper limbs muscles.

 

If your rear wheels are too high or large, it means that your fingertips could be resting beyond the wheel hubs. In this case, you will have the opposite effects:

 

Your shoulders will be continuously elevated upwards and elbows excessively bent during propulsion.

This can cause damage to shoulder muscles: tendinitis, rotator cuff tears and impingement.

If rear wheels are too big, they can make transferring in or out more difficult, as the seat-to-floor height increases and getting in or out of the seat is more difficult.

As you have seen, each configuration is different in function and purpose. The wheelchair should be adjusted individually to meet each user's needs safely and functionally.

 

 

At Maidesite, we offer a wide range of adjustable manual wheelchairs, so that you can find the right configuration for you and your needs. Remember that it is important that you let yourself guide by a professional in order to conduct an individual assessment and get advice on the right solutions.


Professional Manufacturer of Hospital Beds and Wheelchairs. Looking Forward to Cooperating with You!

Maidesite

Products

Contact Us

Email : Ruilangde@maidesite.com

Tel/WhatsApp/Wechat:+86 158 3180 7165

Address : Miao zhen high-tech industrial development zone, Jing county, Hengshui city, Hebei province, China

Link Exchange: Maidesite Schreibtisch
© Copyright: Hengshui Hengzekang Medical Equipment Co., Ltd.  All rights reserved.